Mounting

The mounting in the glider can be done by each (technical experienced) pilot. After removing the old pilot stick and cutting off the wiring the new stick is mounted on the control rod for example with acidfree silicone or thickened resin. Finally the wiring has to be re-build

Before gluing the pilot stick in your glider you should check, if the mounting should be symmetrical of with an angle around the axis of the control rod to reach a better haptic adaptation.

The stick has NO aviation approval (as the most pilot sticks in gilders), the mounting has to be checked by an aviation inspector. I will not overtake any responsibility or liability for the usage of this pilot stick in aircrafts or other applications.